Ports and operating elements
Installing a module
1
►
Slide module in the direction of the arrow into
the notebook (1) until it noticeably engages.
Removing and installing the battery
Notes
Battery
Only use rechargeable batteries approved by Fujitsu Technology
Solutions for your notebook.
Never use force when inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
The illustrations shown below may differ from your actual device. They are
merely intended to clarify the principles involved.
Removing the battery
►
Switch the notebook off and pull the power plug out of the mains socket.
Battery
►
Close the LCD screen.
►
Disconnect all cables connected to the notebook.
►
Turn your notebook over and place it on a stable, sturdy,
fl
at surface. If necessary, lay an
anti-slip cloth on this surface to prevent the notebook from being scratched.
2
3
1
►
Push the battery lock in the direction of
the arrow (1) as far as it will go.
►
Slide the locking device in the direction of
the arrow (2) and hold it in place.
►
Remove the battery from the notebook
in the direction of the arrow (3).
20
A26391-K260-Z220-1-7619, edition 1
