Fujitsu CELSIUS H910, Operating Manual

Page: 84 / 101

Troubleshooting and tips
The notebook stops working
Notebook Energysaving mode
Cause Troubleshooting
Notebook is in energy saving mode. ► Leave energy saving mode.
An application programme has caused the
malfunction. ► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead. ► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
The printer does not print
Printerdoesnotprint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly. ► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver. ► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The radio connection to a network does not work
Theradioconnectiontoanetwork does notwork
Cause Troubleshooting
The wireless component is disabled. ► Switch the radio component on (see
"Switching the wireless components on and
off", Page 43
).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work. ► Check whether the radio connection is
switched on via the software.
► Further information on using the radio
component can be found in the help
fi les.
80 Fujitsu Technology Solutions