Fujitsu CELSIUS H7510 Operating Manual Download

Page: 43 / 86

Working with the notebook

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook to enable access to a mobile radio network in conjunction with an installed UMTS module.

Follow the instructions supplied by the provider of the SIM card.

The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.

Inserting the SIM card

The device support cards in micro-SIM format (15 mm x 12 mm).

►

Remove the battery, see

"Removing a battery", Page 33

►

Slide the SIM card into the slot (1) until you hear it engage, as shown in
the diagrams on the battery compartment.

►

Install the battery again, see

"Installing a battery", Page 34

Fujitsu

Summary of Contents for CELSIUS H7510























































































Search results

Summary of Contents for CELSIUS H7510

Reviews:

Related manuals for CELSIUS H7510

Brands by name

Popular brands

Fujitsu CELSIUS H7510, Operating Manual

Search results

Summary of Contents for CELSIUS H7510

Reviews:

Related manuals for CELSIUS H7510

Brands by name

Popular brands