Fujitsu CELSIUS H730 Operating Manual Download Page 77

Page: 77 / 92

Troubleshooting and tips

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

The radio connection to a network does not work

Theradioconnectiontoanetwork does notwork

Cause

Troubleshooting

The wireless component is disabled.

►

Switch the radio component on (see

"Switching the wireless components on and
off", Page 40

The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

►

Check whether the radio connection is
switched on via the software.

►

Further information on using the radio
component can be found in the help

les.

SmartCard reader is not recognised

Cause

Troubleshooting

Chip card inserted incorrectly.

►

Make sure you have inserted your
SmartCard into the SmartCard reader with
the chip facing upwards.

►

Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.

SmartCard PIN forgotten

Cause

Troubleshooting

PIN forgotten

►

If you work in a network, contact your
system administrator, who can unlock your
Tablet PC with a supervisor PIN.

Fujitsu

Summary of Contents for CELSIUS H730





























































































Search results

Summary of Contents for CELSIUS H730

Reviews:

Related manuals for CELSIUS H730

Brands by name

Popular brands

Fujitsu CELSIUS H730, Operating Manual

Search results

Summary of Contents for CELSIUS H730

Reviews:

Related manuals for CELSIUS H730

Brands by name

Popular brands