Fujitsu CELSIUS H250 Operating Manual Download

Page: 44 / 85

Security functions

Using Kensington Lock

KensingtonLock

Anti-theftprotection

KensingtonLock:

The notebook has a Kensington Lock device for the Kensington MicroSaver. With the
Kensington MicroSaver, a sturdy steel cable, you can protect your notebook and Port Replicator
from theft. The Kensington MicroSaver is available as an accessory.

►

Fit the Kensington MicroSaver to the
corresponding device on your notebook.

Setting up the

ngerprint sensor (device-dependent)

Fingerprintsensor

Fingerprintsensor:

Depending on the model, your notebook is equipped with a

ngerprint sensor. The

ngerprint sensor can record the image of a

ngerprint. With additional

ngerprint software,

this image can be processed and used instead of a password.

►

Install the

ngerprint software from

the CD supplied in order to use the

ngerprint sensor (1).

A26391-K200-Z226-1-7619, edition 2

Summary of Contents for CELSIUS H250






















































































Search results

Summary of Contents for CELSIUS H250

Reviews:

Related manuals for CELSIUS H250

Brands by name

Popular brands

Fujitsu CELSIUS H250, Operating Manual

Search results

Summary of Contents for CELSIUS H250

Reviews:

Related manuals for CELSIUS H250

Brands by name

Popular brands