Fujitsu BS2000/OSD Operation Manual Download Page 23

Page: 23 / 111

U25339-J-Z126-1-7600

Switching the S130 on and off from the SKP

c) You can also terminate the SINIX system using the on/off button on the SKP. However,

please make note of the following:

If the SKP is switched off using the button, it sends the command /shutdown or a
self-defined /run xxxx command to any running BS2000 system before it switches
itself off after a certain wait time has expired.

You can define the shutdown command and the length of the wait period using the
sysadm forms.

Select the menu item “sinix_2000 - System Administration SINIX-2000“ on the
UNIX System V, Administration menu.

Select the menu item “up_down - Startup/shutdown settings“ on the SINIX-2000
system administration menu.

You will find a detailed description of how to configure time-controlled startup/shutdown
in the section “up_down” of the “SINIX-2000 V7.0” manual.

5.2 Switching the S130 on and off from the SKP

To switch the S130 on and off from the SKP, it must have the optional on/off facility.

The on/off facility is linked to the SKP via the COM2 V.24 interface.

V.24

Channel type 2

On/off facility

SKP

LAN

Console

S130

SVP

LAN

COM2

Summary of Contents for BS2000/OSD
















































































































Search results

Summary of Contents for BS2000/OSD

Reviews:

Related manuals for BS2000/OSD

Brands by name

Popular brands

Fujitsu BS2000/OSD, Operation Manual

Search results

Summary of Contents for BS2000/OSD

Reviews:

Related manuals for BS2000/OSD

Brands by name

Popular brands