Fujitsu B24-8 TE Pro Operating Manual Download Page 26

Page: 26 / 43

Operation

Adjusting the brightness

►

Press the

button to open the

Brightness

setting window.

►

Press the

button or the

button to set the desired brightness.

►

Press the

button to activate/deactivate the low blue light function.

►

Press the

button to close the menu.

Performing auto-adjustment of the monitor

This function is only intended for analogue image transmission (VGA).

►

Press the

AUTO

button for about 1 second.



The

Auto Processing

message appears.

Picture quality and position are set to optimum values for your system.

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.

►

Press the

button and the ON/OFF button at the same time for several seconds.



The message

OSD locked / unlocked

is displayed.

Please proceed in the same manner to release the locked OSD menu again.

Lock the ON/OFF button

The ON/OFF button can be locked to prevent accidental or unauthorised
changes to the monitor settings.

►

Press the

ECO

button and

INPUT

button at the same time for a few seconds.



The message

Power button locked / unlocked

is displayed.

To remove the locking of the ON/OFF button again, proceed in the same way.

Fujitsu

Summary of Contents for B24-8 TE Pro












































Search results

Summary of Contents for B24-8 TE Pro

Reviews:

Related manuals for B24-8 TE Pro

Brands by name

Popular brands

Fujitsu B24-8 TE Pro, Operating Manual

Search results

Summary of Contents for B24-8 TE Pro

Reviews:

Related manuals for B24-8 TE Pro

Brands by name

Popular brands