Operation
Changing the monitor settings
When putting the monitor into operation for the
fi
rst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. When the OSD
menu is active, the current meaning of the buttons is shown directly
over the buttons on the edge of the screen.
The display over the buttons varies depending on the sub-menu chosen.
With the OSD menu not activated, you can make the following settings directly.
Call up OSD menu
Activate/deactivate ECO operating mode
Select input signal (digital/analog)
Adjust volume
Adjust brightness
Perform auto-adjustment of the monitor with analog input
ON/OFF switch with power indicator
Select OSD language
After the
fi
rst switch on and after the monitor has been reset to the factory settings,
the selection screen for the language appears:
►
Press the
ECO
/
button or the
INPUT
/
button to select the desired language.
►
Press the
MENU
/
button to con
fi
rm or the
AUTO
/
button to cancel.
After selecting the OSD language for the
fi
rst time, you can change
it at any time in the OSD.
Fujitsu
21
