Fujitsu AVN20D Installation Manual Download

Page: 1 / 16

Be sure to read this installation manual thoroughly prior to installation and making connections. If

installation methods or non-standard parts not specified in this installation manual are used, accidents

or injury may result.

Professional installation is recommended, contact the place of purchase to schedule an appointment.

After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for

later reference.

To dealers:

Give this installation manual to the customer after installation and all connections have been

completed.

Contents

Components

Installation Diagram

Before

installation

Installation

Connections

For your safety in using the AVN51D

Names and functions of terminals

Installing the GPS antenna

Installing the main unit

DVD Navigation System with 6.5" Wide TFT Display and DVD Multi-Source Receiver

INSTALLATION MANUAL

Connecting the vehicle speed pulse, parking brake, and reverse wires

System connection example

MODEL

Español

Français

Italiano

Nederlands

Svenska

English

Summary of Contents for AVN20D

















Search results

Summary of Contents for AVN20D

Reviews:

Related manuals for AVN20D

Brands by name

Popular brands

Fujitsu AVN20D, Installation Manual

Search results

Summary of Contents for AVN20D

Reviews:

Related manuals for AVN20D

Brands by name

Popular brands