4
Fig. 5 Remote Control Unit
D
SLEEP button
E
MASTER CONTROL button
F
SET TEMP./SET TIME buttons (
)
G
Signal Transmitter
H
TIMER button
I
FAN CONTROL button
J
START/STOP button
K
AIR FLOW DIRECTION button
L
SWING LOUVER button
M
TIME ADJUST button
N
ACL button
Rear side (Fig. 6)
O
TEST RUN
●
Touch the two metal contacts with a me-
tallic object to send the signal to perform
a test run.
●
Perform a test run only when installing the
air conditioner. If the signal to perform a
test run is received during normal opera-
tion, the air conditioner’s thermostat will
malfunction.
●
If the signal to perform a test run is re-
ceived during normal operation, the unit
will switch to the test operation mode and
the indoor unit’s OPERATION and TIMER
indicator lamps will flash simultaneously.
●
To stop the test operation mode, press the
START/STOP button to stop the air condi-
tioner.
P
Remote Control Unit Display (Fig. 7)
Q
Transmit Indicator
R
Clock Display
S
Operating Mode Display
T
T imer Mode Display
U
Fan Speed Display
V
Temperature Set Display
W
T imer Set Indicator
X
Temperature Set Indicator
Fig. 1 Indoor Unit
1
Operating Control Panel (Fig. 2)
2
MANUAL AUTO button
3
Remote Control Signal Receiver
4
Indicator Lamps (Fig. 3)
5
OPERATION Indicator Lamp (red)
●
Lights when unit is operating.
*
●
The lamp will flash slowly when the de-
frosting operation (see page 17).
*
●
The lamp will flash quickly (1 second on, 1
second off) when the selected operating
mode can not be used (see page 18).
6
TIMER Indicator Lamp (green)
●
If the TIMER indicator lamp flashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting
(see page 17 Auto Restart).
7
SWING Indicator Lamp (orange)
8
Intake Grille (Fig. 4)
9
Air Filter
0
Air Flow Direction Louver
A
Right-Left Louver
(behind Air Flow Direction Louver)
B
Drain Hose
C
Air Cleaning Filter
