En-25
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Display
Filter sign reset
Filter sign
Initial
On
Mo 10:00
Cancel:
OK:
When you set this setting to [On], and air filter cleaning on the
indoor unit is required, the icon is displayed on the “Monitor”
screen.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°C
26
Menu
Filter sign
Mo 10:00
End:
5-5. R.C. sensor control setting
NOTE
• This function can be used only if the setting is activated in
the installation. To activate this function, consult authorized
service personnel.
1
In “Submenu” screen, select [R.C. sensor control] with
the [Cursor button (Up/Down)], and press the [Enter but-
ton].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Filter sign
R.C. sensor control
Room temp. display
Date and time
On
Off
Monitor
Mo 10:00
OK:
Cancel:
Submenu
[
1/2
]
When you set this setting to [On], the icon is displayed on the
“Monitor” screen.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Cool
Monitor
High
°C
26
Menu
R.C. sensor control
Mo 10:00
End:
11
5-6. Room temp. display setting
1
In “Submenu” screen, select [Room temp. display] with
the [Cursor button (Up/Down)], and press the [Enter
button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
Setting:
Back:
Submenu
[
1/2
]
2
Select [On] or [Off] with the [Cursor button (Up/Down)],
and press the [Enter button].
Screen
Filter sign
R.C. sensor control
Room temp. display
Date and time
On
Off
Cancel:
Monitor
Mo 10:00
OK:
Submenu
[
1/2
]
When you set this setting to [On], the room temperature is
displayed on the screen.
Mode
Menu
Cool
Monitor
Room 2
8˚
C
Set temp.
Fan
High
°C
26
Mo 10:00
NOTE
• Displayed room temperature is the approximate temperature
detected around this remote controller, and it could be
different from the actual room temperature. It also be
influenced by the installation environment of the remote
controller.
9381067145_OM_EN.indd 25
14/09/2015 13:48:06
