En-19
Knockout hole
6. 2.
CAUTION
Be careful not to deform or scratch the panel while opening the knockout holes.
•
After opening the knockout hole, remove the burr on the edges to prevent snapping of wires.
•
It is recommended to apply rust proof paint on the edges to prevent rust.
Electric wires can be connected from the front or from the left.
(Knockout holes are prepared so that wiring can be made from 2 different directions.)
Use the knockout holes on the front and the left separately when necessary.
(Unit: mm)
Knockout hole
Knockout hole
(Unit: mm)
9378945029-03_IM_EN.indb 19
9378945029-03_IM_EN.indb 19
2011-9-20 16:25:54
2011-9-20 16:25:54
