background image

ADA-91270-90340-100PFV v1.0 

Warranty and Disclaimer 

© Fujitsu Microelectronics Europe GmbH 

- 3 -  

UG-910012-16 

Warranty and Disclaimer 

To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts 
its warranties and its liability for the  ADA-91270-90340-100PFV Board and all its deliverables (eg. 
software include or header files, application examples, target boards, evaluation boards, engineering 
samples of IC’s etc.),  its performance and any consequential damages, on the use of the Product in 
accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under 
which  agreements  the  Product  has  been  delivered,  (ii)  the  technical  descriptions  and  (iii)  all 
accompanying  written  materials.  In  addition,  to  the  maximum  extent  permitted  by  applicable  law, 
Fujitsu  Microelectronics  Europe  GmbH  disclaims  all  warranties  and  liabilities  for  the  performance  of 
the  Product  and  any  consequential  damages  in  cases  of  unauthorised  decompiling  and/or  reverse 
engineering  and/or  disassembling.  Note,  the  ADA-91270-90340-100PFV  Board  and  all  its 
deliverables are intended and must only be used in an evaluation laboratory environment
.  

 

1. 

Fujitsu Microelectronics Europe GmbH warrants that the Product will  perform substantially in 
accordance with the accompanying written materials for a period of 90 days form the date of 
receipt  by  the  customer.  Concerning  the  hardware  components  of  the  Product,  Fujitsu 
Microelectronics Europe GmbH warrants that the Product will be free from defects in material 
and  workmanship  under  use  and  service  as  specified  in  the  accompanying  written  materials 
for a duration of 1 year from the date of receipt by the customer. 

 

2. 

Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability 
and  the  customer’s  exclusive  remedy  shall  be,  at  Fujitsu  Microelectronics  Europe  GmbH´s 
sole discretion, either return of the purchase price and the license fee, or replacement of the 
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in 
original packing and without further defects resulting from the customer’s use or the transport. 
However, this warranty is excluded if the defect has resulted from an accident not attributable 
to  Fujitsu  Microelectronics  Europe  GmbH,  or  abuse  or  misapplication  attributable  to  the 
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH. 

 

3. 

To  the  maximum  extent  permitted  by  applicable  law  Fujitsu  Microelectronics  Europe  GmbH 
disclaims  all  other  warranties,  whether  expressed  or  implied,  in  particular,  but  not  limited  to, 
warranties of merchantability and fitness for a particular purpose for which the Product is not 
designated. 

 

4. 

To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s 
and its supplier’s liability are restricted to intention and gross negligence. 

 

 

NO LIABILITY FOR CONSEQUENTIAL DAMAGES 

 

 

To  the  maximum  extent  permitted  by  applicable  law,  in  no  event  shall  Fujitsu 
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever 
(including  but  without  limitation,  consequential  and/or  indirect  damages  for  personal 
injury,  assets  of  substantial  value,  loss  of  profits,  interruption  of  business  operation, 
loss  of  information,  or  any  other  monetary  or  pecuniary  loss)  arising  from  the  use  of 
the Product. 

 

Should  one  of  the  above  stipulations  be  or  become  invalid  and/or  unenforceable,  the  remaining 
stipulations shall stay in full effect

 

Summary of Contents for ADA-91270-90340-100PFV

























Reviews: