En-9
ADJUSTING THE DIRECTION OF AIR CIRCULATION
DANGER!
Never place fingers or foreign objects inside
the outlet ports, since the internal fan ope-
rates at high speed and could cause personal
injury.
●
Attempting to move UP/DOWN air di-
rection flaps or RIGHT/LEFT air direc-
tion louvers manually could result in
improper operation; in this case, stop
operation and restart. The louvers
should begin to operate properly
again.
●
During use of the Cooling and Dry
modes, do not set the UP/DOWN air
direction flaps in the Heating range (
5
to
7
) for long periods of time, since
water vapor may condense near the
outlet louvers and drops of water may
drip from the air conditioner. During
the Cooling and Dry modes, if the Air
Flow Direction Louvers are left in the
heating range for more than 30 mi-
nutes, they will automatically return to
position
4
.
●
When used in a room with infants, chil-
dren, elderly or sick persons, the air
direction and room temperature
should be considered carefully when
making settings.
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
●
Adjust the up, down, left and right AIR directions with the AIR DIRECTION buttons on the Remote Controller.
●
Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have stopped
moving.
RIGHT/LEFT air direction louvers
Vertical Air Direction Adjustment
Press the SET button (Vertical).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
6
7
Types of Air flow Direction Setting:
1
,
2
,
3
,
4
:
During Cooling/Dry Modes
5
,
6
,
7
:
* During Heating mode
The Remote Controller’s display does
not change.
●
Use the air direction adjustments within the ranges shown above.
●
The vertical airflow direction is set automatically as shown, in accordance with
the type of operation selected.
During Cooling/Dry mode : Horizontal flow
1
* During Heating mode
: Downward flow
7
●
During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal
1
; the air direction cannot be adjusted during this pe-
riod.
Horizontal Air Direction Adjustment
Press the SET button (Horizontal).
Each time the button is pressed, the air direction range will change as follows:
1
2
3
4
5
The Remote Controller’s display does
not change.
●
Use the air direction adjustments within the ranges shown above.
9374379262-03_OM_en.p65
2/4/10, 3:06 PM
9
