Fujitsu ABY18TL MA, Operating Manual

Page: 16 / 27

En-16
°
C
NON STOP CLOCK TEMP AUTO
TIMER
MODE
START/STOP
CLOCK ADJUST
SET TIME TEMP./DAY FAN
CONTROL
MASTER
CONTROL
2 1
HIGH
AUTO
COOL
DEFROST TEST
SET DAY OFF
SWING OPERATION
1
2 3
4
5
Horizontal Air Direction Adjustment
This instructions are applicable to “CEILING SUSPENSION TYPE” and “FLOOR
CONSOLE/UNDER CEILING DUAL TYPE”.
Press the HORIZONTAL AIR FLOW DIRECTION SET button.
Each time the button is pressed, the air direction range will change as follows:
1 2 3 4 5
The remote controller’s display does not change.
Fig. 14
■
CEILING SUSPENSION TYPE
■
FLOOR CONSOLE/UNDER CEILING DUAL TYPE
Example: When set to horizontal air
direction.
ADJUSTING THE DIRECTION OF AIR CIRCULATION
TIMER
MODE
START/STOP
CLOCK ADJUST
SET TIME TEMP./DAY FAN
CONTROL
MASTER
CONTROL
SET DAY OFF
Example: When set to vertical swing.
Instructions relating to “the indoor unit’s indicator lamp” (**) are applicable to “CEILING SUSPENSION TYPE” and “FLOOR
CONSOLE/UNDER CEILING DUAL TYPE”.
Begin air conditioner operation before performing this procedure.
To select Vertical airflow SWING Operation
This instructions are applicable to “CEILING SUSPENSION TYPE”, “FLOOR CON-
SOLE/UNDER CEILING DUAL TYPE” and “CASSETTE TYPE”.
Press the VERTICAL SWING button.
The remote controller’s VERTICAL SWING lamp (orange) **and indoor unit’s
SWING indicator lamp (VERTICAL SWING) (orange) will light up.
In this mode, the UP/DOWN air direction flaps will swing automatically to direct
the air flow both up and down.
To Stop Vertical airflow SWING Operation
Press the VERTICAL SWING button once again.
The remote controller’s VERTICAL SWING lamp **and indoor unit’s SWING in-
dicator lamp (VERTICAL SWING) will go out.
Airflow direction will return to the setting before swing was begun.