Fujitsu A512 Operating Manual Download

Page: 52 / 81

Connecting external devices

Connecting external audio devices

Microphone port/Line In

Audiodevices,connecting

Audioports

Microphone,connecting

The microphone port/Line In allows you to connect an external microphone, a MiniDisc
player, MP3 player, CD player or a tape deck to your notebook.

►

Connect the audio cable to the
external device.

►

Connect the audio cable to the microphone
port/Line In of the notebook.

Headphone port

Connectingaudio devices

Audioports

Connectingheadphones

You can connect headphones or external loudspeakers to your notebook via the headphone port.

►

Connect the audio cable to the
external device.

►

Connect the audio cable to the headphone
port of the notebook.



The internal loudspeakers are disabled.

If you purchase a cable from a retailer, please note the following information:

The headphone port on your notebook is a "3.5 mm jack socket".

If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".

Fujitsu

Summary of Contents for A512


















































































Search results

Summary of Contents for A512

Reviews:

Related manuals for A512

Brands by name

Popular brands

Fujitsu A512, Operating Manual

Search results

Summary of Contents for A512

Reviews:

Related manuals for A512

Brands by name

Popular brands