Fujitsu Siemens Computers STYLISTIC ST50XX, User Manual

Page: 24 / 79

Using the Tablet PC
16 A26391-K145-Z120-1-7619, edition 3
Suspend mode
i
There are two different Suspend modes: Your system may be configured to use either
Suspend-to-RAM mode or Hibernate mode.
Suspend-to-RAM mode
All system functions are turned off to conserve power. Power to memory is on, maintaining data in
programs that were running before system operation was suspended.
The system does not respond to the pen or other input when in Suspend-to-RAM mode. Refer to the
"Resuming operation" section in this chapter for information on returning the system to the ON
mode.
Hibernate mode
All system functions are turned off to conserve power. Active data in programs that were running
before suspending system operation is stored on the hard disk drive.
The system does not respond to the pen or other input. Refer to the "Resuming operation" section in
this chapter for information on returning the system to the ON mode.
OFF mode
All system functions are turned off to conserve power. The system does not respond to the pen or
other input.
i
The system consumes the same amount of power whether it is in Hibernate mode or the
OFF mode.