Fujitsu Siemens Computers SCENIC eD, Operating Manual

Page: 18 / 53

Preparation for use and operation Connecting devices
10
A26361-K622-Z100-1-7619
Connecting devices
!
The power plug must be disconnected!
Do not connect or disconnect cables during a thunderstorm (electric shock).
Always take hold of the actual plug body. Do not pull the cable (you could damage the
plug or socket)!
i
Read the documentation on the external device before connecting it.
Connect and disconnect the cables in the order described below.
Connecting cables
•
Turn off all power and equipment switches.
•
Unplug all power plugs from the grounded power outlets.
•
Connect all cables at the system unit and peripherals. You must observe the information
provided in the chapter "Important notes".
•
Plug all data communication cables into the utility sockets.
•
Plug all power cables into the grounded power outlets.
Disconnecting cables
•
Turn off all power and equipment switches.
•
Unplug all power plugs from the grounded power outlets.
•
Unplug all data communication cables from the utility sockets.
•
Disconnect all cables from the system unit and peripherals.