Fujitsu Siemens Computers POCKET LOOX N100 series, Easy Manual, Page: 26 / 51

Operating the Pocket PC
Resetting the Pocket-PC (Cold start)
If your Pocket-PC locks up and switching it on and off with the Suspend/Resume button and soft
reset has no effect, you can reset your Pocket-PC using a cold start.
i
Unsaved data is lost. Shut down all programs before you reset the Pocket-PC.
► Take the batteries out briefly, then put them back in.
► Then switch the Pocket PC on again
Using stylus and display
The stylus is telescopic.
► Extend the stylus.
► Briefly touch the desired element on the display with the stylus to trigger an action.
Using the hold switch
Using the hold switch, you can lock the keys and the display of your Pocket PC to prevent entries
being made inadvertently.
a
1
2
► To set the lock, move the hold switch (a) in the direction of the arrow (1).
The keys and display of the Pocket PC are now locked.
► To release the lock, move the hold switch in the direction of the arrow (2).
The lock is released.
18 A26391-K197-Z120-1-7619, Edition 1