Fujitsu Siemens Computers MYRICA V27-1, Operating Manual

Page: 32 / 262

Ofrecido por www.electromanuales.com
DIGITAL HOME Remote Control
► Press the button with the number on the numerical keypad.
The LED of the button will flash briefly three times.
The MYRICA V32-1 device is activated. You can operate the device using your DIGITAL HOME
remote control.
Copying all the button functions of a device available on the DIGITAL HOME remote control
onto the button
► Press the button for about 5 seconds.
The LED of the button will light up.
► Press the button , or
,
depending on the Fujitsu Siemens Computers’ device that
you want to transfer onto the button.
The LED of the pressed button will start to flash.
► Using the numerical keypad, enter the number of the device class that you want to transfer.
The button will flash briefly three times.
The button functions of a device made by Fujitsu Siemens Computers are now transferred to the
button of the DIGITAL HOME remote control. Now you can enter the individual buttons with functions
from remote controls made by other manufacturers (as described in Chapter “Programming the
remote control for devices made by other manufacturers“).
In this way, you can copy the functions for the ACTIVY Media Center 5xx, for example, onto the
button and then put the volume functions Louder/Softer for a home cinema on the buttons by
selecting .
8 - English 10600732149, Edition 3