Fujitsu Siemens Computers MagaRAID 320-0X, User Manual, Page: 24 / 41

2-2 MegaRAID 320-0X Hardware Installation
Copyright © 2003 by LSI Logic Corporation. All rights reserved.
2.2 Quick Installation
The following steps are for quick storage adapter installation. These steps are
for experienced computer users/installers.
Section 2.3, “Detailed Installation,”
page 2-2 , contains the steps for all others to follow.
Step 1. Turn power off to the server and all hard drives, enclosures, and
system components and remove the PC power cord.
Step 2. Open the cabinet of the host system by following the instructions in
the host system technical documentation.
Step 3. Check the jumper settings on the adapter.
Step 4. Install the MegaRAID 320-0X storage adapter in a special PCI-X
expansion slot.
Step 5. Perform a safety check.
– Ensure that the MegaRAID 320-0X storage adapter is properly
installed.
– Close the cabinet of the host system.
Step 6. Turn power on after completing the safety check.
2.3 Detailed Installation
This section provides detailed instructions for installing a MegaRAID 320-0X
storage adapter.
Step 1. Unpack the Adapter
Unpack and remove the storage adapter. Inspect it for damage. If it
appears damaged, or if any items listed below are missing, contact
your LSI Logic support representative. The MegaRAID 320-0X
storage adapter is shipped with:
– The U320 Driver Suite CD, which contains MegaRAID
drivers for supported operating systems, an electronic version
of this
User’s Guide , and other related documentation.
– A license agreement
Step 2. Power Down the System