SCALEOVIEW S17-2 / S19-2
22
A26361-K1018-Z120-1-7619, edition 1
Having this problem?
Check the following points:
Picture is shaking
►
Check whether the data cable for the monitor
is correctly attached to the monitor port on the
computer.
►
Press the AUTO/EXIT button to perform the
auto-adjustment of the screen.
Picture is wrongly adjusted
►
Press the MENU/SEL button to activate the
function
Factory Recall
. The
Auto Processing
message is displayed.
Picture disturbances (vertical lines)
►
Press the AUTO/EXIT button to perform the
auto-adjustment of the screen.
Picture disturbances
(horizontal lines, picture noise)
►
Press the AUTO/EXIT button to perform the
auto-adjustment of the screen.
The screen becomes darker
The background lighting has a limited lifetime. If
your monitor display should become too dark, the
background lighting will have to be exchanged.
►
Please contact our help desk.
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels may be present. The maximum permitted number of
pixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II).
Example: a 17" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720
pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 4 million dots
in total.
According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e. a
total of 25 faulted dots. This corresponds to approx. 0.00062 % of the entire screen surface!
