Fujitsu Siemens Computers ESPRIMO P, Operating Manual, Page: 18 / 68

Connecting a keyboard
Depending on the equipment level selected, your device will be supplied with a standard keyboard or
a USB keyboard.
Connecting standard keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the rectangular socket on the
underside or on the rear of the keyboard.
►
► Plug the round plug of the keyboard cable into the keyboard port on the device.
Connecting USB keyboard
Use the supplied keyboard cable only.
► Plug the rectangular connector of the keyboard cable into the socket on the underside or on the
rear of the keyboard.
►
► Insert the flat rectangular USB plug of the keyboard cable into a USB port of the device.
Connecting the device to the mains voltage
!
The visible value must agree with the local mains voltage:
115 = 100 V to 127 V
230 = 200 V to 240 V
If an incorrect mains voltage is set, push the slide switch all the way into the other position
with a pointed object.
You may only operate the device, if the voltage for the device is set to the local mains
voltage.
100 V - 125 V
200 V - 240 V
► Check the voltage setting.
10 A26361-K1008-Z120-1-7619, edition 1