14
D2352 (TX600 S3/RX600 S3)
Main memory
Features
3.2
Main memory
The system board offers four slots for hot-plug memory boards. Each memory
board can be equipped with up to four memory modules (in two memory banks).
The slots for main memory can be populated with 1 Gbyte, 2 Gbyte or 4 Gbyte
DDR II/400 MHz DIMM memory modules. The maximum memory is 64 Gbyte.
ECC with memory scrubbing and with the Single Device Data Correction
(SDDC) function is supported.
I
You will find the descriptions how to install a memory board in the
Operating Manual of your server and how to install memory modules in
the Opttion Guide of your server.
Memory board population
Figure 4: Memory board population
–
Start with memory bank 1 (DIMM1A/DIMM1B).
–
Install the memory modules in pairs. All DIMMs in a pair must be of the same
type and size.
–
The module capacity between pairs can differ: pair 2A/2B can be populated
with two 1 Gbyte modules and pair 1A/1B with two 2 Gbyte modules.
DIMM 1B
DIMM 1A
DIMM 2B
DIMM 2A
