Fujitsu Siemens Computers D1419, Technical Manual, Page: 24 / 32

Settings with switches
16 - English
A26361-D1419-Z120-1-7419
Settings with switches
1 2 3 4
ON
i
Preset for switches 1 to 4 =
Off
.
The clock frequency of the processor is set automatically.
Recovering System BIOS - switch 1
Switch 1 enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service centre).
on The system boots from the "Flash BIOS floppy disk" from Drive A and reprograms
the system BIOS on the board.
off
The System BIOS is started with the system BIOS from the mainboard (default
setting).
Skipping the password query - switch 2
Switch 2 is used to define whether the password is queried at system startup, if the password
protection is enabled in
BIOS Setup (in Security menu , the Password field must be set to Enabled ).
on
The password query is skipped. Passwords are deleted.
off The password query is effective (default setting).
Write protection for Flash BIOS - switch 3
Switch 3 is used to define whether the System BIOS is write protected or not.
on The System BIOS can neither be written to nor deleted. Flash-BIOS update from
floppy disk is not possible.
off The System BIOS can be written or deleted. Flash-BIOS update from floppy disk is
possible (default setting).
Write protection for floppy disks - switch 4
Switch 4 is used to define whether floppy disks can be written or deleted in the floppy disk drive. To
write and delete floppy disks, the write-protection in
BIOS Setup
must be disabled (in menu
Security
,
the field Diskette Write must be set to Enabled ).
on The floppy disk drive is write-protected.
off Floppy disks can be read, written and deleted (default setting).