Color monitor 21P3
A26361-K618-Z100-2-5E19
English - 17
Electrical data
Video:
Analog, positive, 0.7 Vpp, 75 Ohm
Synchronization:
Separate Sync. TTL
Horizontal frequency:
30 kHz .... 115.6 kHz (multi-scanning)
Refresh rate:
50 Hz .... 160 Hz
Maximum pixel rate:
260 MHz
Power supply (switches over automatically):
100 V -120 V (
±
10 %)
200 V - 240 V (
±
10 %)
50 Hz - 60 Hz
Power consumption:
(see power management):
< 130 W (ON, Normal mode)
< 8 W (Standby mode)
< 8 W (Suspend mode)
< 3 W (OFF mode)
CRT
Color characteristics (color coordinates):
Red
x = 0.625
y = 0.340
Green
x = 0.285
y = 0.605
Blue
x = 0.150
y = 0.065
White
x = 0.283
y = 0.297
Color temperature (color calibration 1):
9300 K
Gamma value:
2,66
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
15 °C .... 35 °C
Humidity:
20 % .... 85 %
Limit range of operation:
5 °C .... 40 °C
Humidity:
20 % .... 85 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA
interface, it can automatically read the data for ensuring optimum operation from your monitor and
select the appropriate settings.
i
If the monitor 21P3 is not yet displayed in the list of monitors, you can select one of the
following monitors instead:
Fujitsu Siemens, Siemens or
Siemens Nixdorf
MCM 213V, MCM 2110, MCM 212V, MCM 2108 NTD,
MCM 2106 NTD, MCM 2103 ND
Hitachi
CM812, CM2198M, CM2112
Philips
201B
MIRO
C2193
