
5
1F02 1581
Detaching Cleaning Parts
1
Oil receiving cover
Grasp the oil receiving cover with one hand at
each end. Pull the top of the cover out and down,
and then lift the bottom of the cover to detach it
from the body.
Oil receiving cover
Catch
Oil recieving cover
2
Oil tray
Hold the oil tray at its tab and slide forward.
Note
In order not to drop the rectifier panel, hold it by both
hands securely. If dropped, it may be a cause of injury,
flaw or warp of parts, etc.
Note
The tray may be filled with oil,
so be careful when
removing it.
3
Rectifier panel
Loosen the rectifier panel screws attaching the
rectifier panel, move the rectifier panel upward
slightly to free the rectifier panel screws from the
rectifier panel mounting guide holes and the body
catches.
Rectifier panel
Catch
Rectifier panel
mounting guide hole
Rectifier panel screw
Note
Be sure to hold the
baffle
filter with hand when
removing it. Otherwise, it may drop and result in injury.
4
Baffle filter
Remove each filter screw fixing the baffle filters
by turning in the counterclockwise direction and
remove the baffle filters.
Filter screw
Loosen
Baffle filter
Baffle Filter and Oil Tray
After immersing the baffle filter and oil tray in a tepid
water with a neutral detergent dissolved for 30 to 40
minutes, wash them with a toothbrush or the like to
remove dirt.
Cleaning
Note
Baffle filters can be separated into 2 parts to make
cleaning easier.
* Make sure to re-assemble the baffle filters filmly
before install the filter to the hood.
Oil may not be collected to the oil tray in the short
period of time depending on oil cooking frequencies
(it’s not defects or failure).
Enclosure and Rectifier Panel
After wiping the cooker hood enclosure and rectifier
panel with a cloth immersed in a neutral detergent
and wring tightly, wipe off moisture thoroughly with a
dry cloth.
Note
When cleaning the rectifier panel, perform it on a flat
surface in order not to deform it.
Guard
After wiping out the guard with a cloth immersed in a
neutral detergent and wring tightly, wipe off moisture
thoroughly with a dry cloth.
Fan
As for cleaning of the fan, please consult
Fujioh/Agent.