Press the ignition knob and
turn it anti-clockwise to the
[ON] position as shown.
Then hold and wait for a few
seconds.
Release the knob and check
the flame if ignited. If the
flame can`t be lgnited, rum
the knob to [OFF] position
and repeat the above steps.
Note:
It would take longer time of
ignition if the appliance is not
being use for a long time or it is
a new installation.
Inner and outer
b u r n e r s a r e
at high flame
position
Inner and outer
b u r n e r s a r e
a t l o w f l a m e
position
Inner burner is
at high flame
position
Inner burner is at
low flame position
Note:
Sometimes
“
pop
”
sound
Heard when the burmer is
switch off. This is normal.
Please turn the ignition
knob clockwise to the
[OFF] position without
pressing
1 5
