Cloud ip camera web client user manual
37
Red
Flashing 2
times
Is connected to the
router, is trying to
obtain an IP address
through DHCP
1. Please make sure your router's
DHCP server is enabled.
2.
Try to restart the router.
3.
Manually assign a WIFI router to
the same gateway IP address.
Red light
flashing 3
times
Ip address has been
obtained or the user
to configure a static ip
address, is trying to
communicate with the
gateway
1. Confirm the router is good.
2. Camera hardware failure, requiring
repair.
Green
light
Normally on
And
gateway
communication
is
normal, is trying to
communicate with the
internet
1. User can check whether the
network can access the Internet.
2. Check whether there are two
routers connected (first level router
network cable will need to receive a
second-class router's WAN port on
the job).
3.
Try the camera placed from
somewhere near WIFI router and
then reconnect the power.
4.
Check the router is turned on the
firewall to do MAC address filtering.
Green
flashing 2
times
Internet traffic is
normal, is trying to
communicate with the
cloud server
1. Restart the machine or the
machine on again to restart.
2.
Try running the camera, based
on the press camera base
RESET button hole 6 seconds,
set the camera to restore the
factory tune.
Green
light
flashing 3
times
Normal
communication with
the cloud server, you
can access the
Normal