21
Pressing the
button will display
the selected course name. The auto
m o d e c o u r s e w i l l
begin with a detection
of your body shape
(3D point navigation
system).
If the angle of the footrest
is not enough, the footrest
will automatically rise to an
angle where massage is
possible before beginning the
massage
During the process of detecting your
body shape the detection points
will light up and the detection level
will be displayed on the detection
indicator.
* !
can be detected, a 'CANNOT DETECT BODY
SHAPE' message will be displayed.In this case select
a course again to begin the detection process again.
After the body shape detection
the knead balls will move to their
prescribed shoulder position.
;*!=
position as desired. Use the
button to adjust the
vertical position, the
button to adjust the
forward/backward position of the knead balls.
The shoulder position of the knead balls can also be finely adjusted with the
MECHA POSITION
buttons.
The body shape detected during the 3D point navigation system will be retained
:
the
button and start again.
4
3
5
6
6
3
