8
TURNING ON YOUR CAMERA
To prepare to use your camera, first press the power supply button to turn on the power. Pressing
the button once more turns the power off.
∗
When you turn your camera on, the lens cover will open and the initial display will appear in the
LCD.
∗
When you are finished using your camera, turn the power off to conserve your battery. If the power
supply is left on for more than seven minutes without the camera being used, the camera will
automatically turn itself off.
Before you turn the camera on, make sure that the lens is not blocked to avoid any interference
with the lens extending into its picture taking position.
1
2
3
CHECKING YOUR BATTERY
To determine the condition of the battery in your camera, turn it on and check the battery capacity
indicator on the LCD panel.
1
on
: Battery capacity is OK.
2
on
: Battery capacity is low. Replace with a new battery.
3
blink
: Shutter cannot be released because battery is exhausted. Replace with a fresh battery.
∗
Check the battery capacity before you start to use your camera.
