FujiFilm X-PRO2, New Features Manual

Page: 8 / 16

EN-6
ENGLISH
Changes and Additions
G
Flash mode (TTL) : Choose a fl ash mode for TTL fl ash control.
•
FLASH AUTO
: The fl ash fi res only as required; fl ash level is
adjusted according to subject brightness. A
p
icon
displayed when the shutter button is pressed halfway
indicates that the fl ash will fi re when the photo is taken.
• STANDARD : The fl ash fi res with every shot if possible; fl ash
level is adjusted according to subject brightness. The
fl ash will not fi re if not fully charged when the shutter
is released.
• SLOW SYNC. : Combine the fl ash with slow shutter speeds
when photographing portrait subjects against a back-
drop of night scenery. The fl ash will not fi re if not fully
charged when the shutter is released.
H
Sync
: Control fl ash timing.
• 1ST CURTAIN : The fl ash fi res immediately after the shutter
opens (generally the best choice).
• 2ND CURTAIN : The fl ash fi res immediately before the shut-
ter closes.
•
AUTO FP(HSS)
: High-speed sync (compatible units only).
The camera automatically engages front-curtain high-
speed sync at shutter speeds faster than the fl ash sync
speed. Equivalent to
1ST CURTAIN when MULTI is selected
for fl ash control mode.
I
Zoom : The angle of illumination (fl ash coverage) for units
that support fl ash zoom. Some units allow the adjustment
to be made from the camera. If
AUTO
is selected, zoom will
automatically be adjusted to match coverage to lens focal
length.
J
Lighting : If the unit supports this feature, choose from the
options below.
•
FLASH POWER PRIORITY : Gain range by slightly reducing
coverage.
• STANDARD : Match coverage to picture angle.
• EVEN COVERAGE PRIORITY : Slightly increase coverage for
more even lighting.
K
Master : Assign the master fl ash to group A ( Gr A ), B ( Gr B ),
or C (
Gr C
). If
OFF
is selected, output from the master fl ash
will be held to a level that does not aff ect the fi nal picture.
Available only if the unit is mounted on the camera hot
shoe as a master fl ash for FUJIFILM optical wireless remote
fl ash control in
TTL , TTL% , or M mode.
K
Number of fl ashes : Choose the number of times the fl ash
fi res each time the shutter is released in MULTI mode.
L
Channel : Choose the channel used by the master fl ash for
communication with the remote fl ash units. Separate
channels can be used for diff erent fl ash systems or to pre-
vent interference when multiple systems are operating in
close proximity.
L
Frequency : Choose the frequency at which the fl ash fi res
in MULTI mode.