28
■
Cautions on Handling the Film and Prints
For details, refer to the instructions and warnings on the
packaging of the FUJIFILM Instant Film “instax mini”.
Bluetooth® Devices: Cautions
IMPORTANT: Read the following notices before using the
product’s built-in Bluetooth transmitter�
■
Use only as part of a Bluetooth network�
FUJIFILM does not accept liability for damages resulting from
unauthorized use. Do not use in applications requiring a high
degree of reliability, for example in medical devices or other
systems that may directly or indirectly impact human life. When
using the device in computer and other systems that demand a
greater degree of reliability than Bluetooth networks, be sure to
take all necessary precautions to ensure safety and prevent
malfunction.
■
Use only in the country in which the device was purchased�
This device conforms to regulations governing Bluetooth
devices in the country in which it was purchased. Observe all
location regulations when using the device. FUJIFILM does not
accept liability for problems arising from use in other
jurisdictions.
■
Wireless data (images) may be intercepted by third parties�
The security of data transmitted over wireless networks is not
guaranteed.
■
Do not use the device in locations subject to magnetic fields,
static electricity, or radio interference�
Do not use the transmitter in the vicinity of microwave ovens or
in other locations subject to magnetic fields, static electricity, or
radio interference that may prevent reception of wireless
signals. Mutual interference may occur when the transmitter is
used in the vicinity of other wireless devices operating in the
2.4 GHz band.
■
The Bluetooth transmitter operates in the 2�4 GHz band�
The standard output is approximately 3�16 mW�
■
This device operates on the same frequency as commercial,
educational, and medical devices and wireless transmitters�
It also operates on the same frequency as licensed transmitters
and special unlicensed low-voltage transmitters used in radio-
frequency identification tracking systems for assembly lines and
in other similar applications.
■
To prevent interference with the above devices, observe the
following precautions�
Confirm that the radio-frequency identification transmitter is
not in operation before using this device. If you notice that this
device causes interference in low-voltage radio-frequency
identification tracing systems, contact a FUJIFILM
representative.
■
The following may be punishable by law:
– Disassembly or modification of this device.
– Removal of device certification labels.
■
Trademark Information
The Bluetooth® word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc., and any use of such marks by
FUJIFILM is under license.
