FujiFilm GFX 50R, Owner'S Manual

Page: 96 / 288

76
5
T
a
k
ing Phot
og
raphs
N Sensitivity
Adjust the camera’s sensitivity to light.
Adjust ISO sensitivity using a function
button (by default,
Fn1 ).
Option Option Description Description
AUTO1
AUTO2
AUTO3
Sensitivity is automatically adjusted in response to shooting
conditions according to combination of standard and max-
imum sensitivity and minimum shutter speed chosen for
A
SHOOTING SETTING > ISO . Choose from AUTO1 ,
AUTO2 , and AUTO3 (
P
77).
12800 – 100 Adjust sensitivity manually. Selected value is shown in display.
H (102400/51200/25600),
L (50)
Choose for special situations. Note that mottling may ap-
pear in pictures taken at
H , while L reduces dynamic range.
N
•
The Fn1 button can be assigned other roles using D BUTTON/DIAL
SETTING > FUNCTION (Fn) SETTING . The role described above can
also be assigned to other function buttons (
P
198).
•
ISO sensitivity can also be adjusted using A SHOOTING SETTING > ISO .
•
Sensitivity is not reset when the camera is turned off .
•
If desired, you can use D BUTTON/DIAL SETTING > COMMAND
DIAL SETTING to confi gure the camera so that ISO sensitivity can be
adjusted using the front or rear command dial.
Adjusting Sensitivity
High values can be used to reduce blur when lighting is poor, while lower
values allow slower shutter speeds or wider apertures in bright light; note,
however, that mottling may appear in pictures taken at high sensitivities.