FujiFilm Frontier-S DX100, Service Manual

Page: 158 / 303

158
4.5Disassembly and Assembly Procedure
DX100 Service Manual
4.5.5.18 Upper Platen Unit
1. Remove the Top Cover. (P.97)
2. Remove the Rear Cover. (P.99)
3. Remove the Upper Cover. (P.100)
4. Remove the Top Cover Open Sensor. (P.164)
5. Remove the Release Unit. (P.152)
6. Remove the U Guide. (P.148)
7. Remove the APG Unit. (P.128)
8. Remove the Driven release holder. (P.154)
9. Remove the PE Sensor Unit. (P.171)
10. Remove the Upper Paper Guide Unit. (P.155)
11. Remove the EJ Frame Unit. (P.153)
12. Remove the AID upper plate.
( "4.5.3.5 AID Unit" Step7 (p113) )
13. Remove the screw, and remove the cable of the AID Unit.
A) Silver M3x6 P-tite screw : one piece
14. Disengage the tab of the Upper Platen Unit from the positioning hole of the Upper
Platen Unit.
15. Release the three bearings of the Upper Platen Unit from the Rear EJ roller.
Figure 4-108. Removing the Upper Platen Unit
A D J U S T M E N T
R E Q U I R E D
Carry out the adjustments referring to "5.1.2 Adjustment Items and the
Order by Repaired Part" (p210) when the Upper Platen Unit is removed or
replaced.
Lubrication Lubrication
Lubricate the parts referring to " 6.3 Lubrication (p280) " when the Upper
Platen Unit is replaced.
Tab and positioning hole
Upper Platen Unit
Rear EJ roller
Bearings
Bearings
Cable of the AID Unit
A