6
Introduction
The Electronic Viewfinder (EVF)
The electronic viewfinder provides the same information as the monitor,
and can be used when bright lighting conditions make the display in the
monitor difficult to see. To switch between the monitor and electronic
viewfinder, press the
EVF/LCD
button (your selection remains in effect
when the camera is turned off or the mode dial is rotated to another
setting).
Bright Ambient Lighting
Reflections and glare caused by bright ambient lighting may make it hard to see the display in the monitor,
particularly when the camera is used outdoors. This can be addressed by holding the
EVF/LCD
button to trigger
outdoor mode. Outdoor mode can also be enabled using the
T
MONITOR SUNLIGHT MODE
option in the
setup menu (
P
97).
Diopter adjustment control
The camera is equipped with diopter adjustment to accommodate indi-
vidual differences in vision. Slide the diopter adjustment control up and
down until the viewfinder display is in sharp focus.
3
Strong sunlight focused through the viewfinder may damage the panel of electronic viewfinder (EVF). Do not
aim the electronic viewfinder at the sun.
LCD
LCD
EVF
Summary of Contents for FINEPIX S91 00 Series
Page 175: ...127 Memo ...
