144
Troubleshooting
Z
Getting ready
Matters
Problems
Possible causes
Solutions
Page
Batteries and
power supply
Nothing happens
when sliding the
ON/OFF switch or
pressing
w
.
The batteries have run out.
Load new or fully charged batteries.
15, 17
The batteries are loaded backward.
Load the batteries in the corrected
direction.
16
The AC power adapter and DC coupler are
not connected correctly.
Connect the AC power adapter and DC
coupler correctly.
–
The camera has been left for a long period
with batteries, AC power adapter and DC
coupler removed.
Load the batteries or connect the AC
power adapter and DC coupler, and wait a
short time before turning the camera on.
15, 21
Batteries run out
quickly.
Camera is used in extremely cold
conditions.
Put the batteries in your pocket or another
warm place to heat it and then load it into
the camera just before you take a picture.
15, 17
The battery terminals are soiled.
Wipe the battery terminals with a clean,
dry cloth.
17
Same batteries have been used for a long
period.
The batteries can no longer be recharged.
Load a new batteries.
15, 17
The rechargeable batteries (if used) have
become deactivated, or the battery
capacity has diminished due to the
memory effect.
Use the rechargeable battery discharging
function to restore the rechargeable
batteries to full capacity.
137
Power cuts out
during operation.
The batteries have run out.
Load new or fully charged batteries.
15, 17
The AC power adapter and DC coupler are
not connected correctly.
Connect the AC power adapter and DC
coupler correctly.
–
144
