FujiFilm FinePix FinePix S9600, Service Manual

Page: 43 / 154

3-1
3. Schematics
FinePix S9100/S9600 Service Manual
3. Schematics
3-1. Cautions
<Cautions when replacing parts>
• Do not reuse removed parts. Always use new parts.
• Note that the negative side of tantalum condensers is readily damaged by heat.
• Except for chemical condensers and tantalum condensers, voltage is not displayed on condensers with a voltage
resistance of 50V or less.
• Resistors not marked are 1/16W chip resistors.
• K
Ω
= 1000
Ω
, M
Ω
= 1000K
Ω
• B characteristics of variable resistors and semi-fixed resistors are not displayed.
3-2. Basic Block Names and Functions
Part name Block name Function
LENS CONST CCD FPC BLOCK CCD Output (IC800)
MAIN PWB ASSY CAMERA BLOCK CCD Output A/D Conversion (IC103)
MOTOR BLOCK Shutter/iris/zoom Drive (IC350)
AUDIO BLOCK Audio IN/OUT(IC500)
LCD/EVF BLOCK LCD/EVF Control, Back Light Control
IPS2 BLOCK Power Control, LED Driver, Flash Charge Control (IC300)
STRB BLOCK Flash Charge
PROCESS BLOCK Image Signal Processing, USB Communications,
System Control (IC204)
MAIN IF BLOCK Connection with the DCST PWB
DCST PWB ASSY DC/DC BLOCK Power Supply Generation (IC600), Power Control
KEY PWB ASSY KEY BLOCK Key SW
TOP FPC ASSY TOP FPC BLOCK Power SW, Release SW, Key SW