FujiFilm FF210005, Owner'S Manual

Page: 124 / 360

100
5
T
a
k
ing Phot
og
raphs
Flash Settings
The following settings are available with the built-in fl ash.
ADJUST END
MODE
Built-In Flash
Setting Setting Description Description
A
Flash control mode
Choose from the following options:
•
TTL : TTL mode. Adjust fl ash compensation (
B
) and choose
a fl ash mode (
C
).
•
M : The fl ash fi res at the selected output (
B
) regardless of
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and check the
results.
•
C
(primary fl ash) : Choose if the fl ash is being used as a pri-
mary fl ash controlling secondly fl ash units, for example as
part of a studio fl ash system.
•
D (OFF) : The fl ash does not fi re.
B
Flash compensation/
output
Adjust fl ash level. The options available vary with the fl ash
control mode (
A
).