FujiFilm FA-67-8F, Operator'S Manual

Page: 5 / 61

Operator’s Manual
FA-67
© Fuji Industrial Technique Co.,Ltd.
– 9502001187
5
Technical data
Maximum working pressure
6.3
bar / 90 psig
EU DECLARATION OF CONFORMITY
We, Fuji Industrial Technique Co., Ltd , 2-1-14, Kamiji,
Higashinari-ku, OSAKA 537-0003, JAPAN, declare under our
sole responsibility that the product (with name, type and
serial number, see front page) is in conformity with the fol-
lowing Directive(s):
2006/42/EC (17/05/2006)
Harmonised standards applied:
Declarations
Noise and vibration
Uncertainty 3 dB(A), in accordance with EN ISO 15744. For
Sound power level, add 11 dB(A)
Vibration standard : ISO-28927-1
These declared values were obtained by laboratory type
test- ing in accordance with the stated standards and are
suitable for comparison with the declared values of other
tools tested in accordance with the same standards. These
declared val- ues are not adequate for use in risk
assessments and values measured in individual work places
may be higher. The ac- tual exposure values and risk of harm
experienced by an indi- vidual user are unique and depend
upon the way the user works, the workpiece and the
workstation design, as well upon the exposure time and the
physical condition of the user.
We, Fuji Industrial Technique Co., Ltd , cannot be held li-
able for the consequences of using the declared values, in-
stead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
http://
www.pneurop.eu/index.php and selecting 'Tools' then
'Legis- lation'.
We recommend a programme of health surveillance to
detect early symptoms which may relate to noise or vibration
expo- sure, so that management procedures can be modified
to help prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction
manual for the machine.
EN ISO 11148-7:2012
Relevant technical information can be requested by
authori- ties only from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain,
10/09/2020 Pascal
ROUSSY Signature of
issuer
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all
instruc- tions before operating the tool. Failure to
follow all the instructions may result in, fire, property
damage and/or severe bodily injury.
►
Read all Safety Information delivered together
with the different parts of the system.
►
Read all Product Instructions for installation,
opera- tion and maintenance of the different parts
of the system.
►
Read all locally legislated safety regulations regard-
ing the system and parts thereof.
►
Save all Safety Information and instructions for fu-
ture reference.
►
The use of a bale hook is not permitted.
Statement of use
This product is designed for removing material using abra-
sives. No other use permitted. For professional use only.
Product specific instructions
Operation
See figures on page 2.
FA-67-8F FA-67-9F
Free speed (rpm)
7600 7000
Spindle thread
5/8” -11 UNC 5/8” -11 UNC
Height (mm)
117.5 117.5
Weight (kg)
2.9 2.9
Weight (lb)
6.4 6.4
FA-67-8F FA-67-9F
Sound pressure level (dB(A))
90 90
Vibration (m/s²)
5.4 4.9
Vibration uncertainty
3.2 3.1