FujiFilm DR-ID 1300, Service Manual

Page: 66 / 628

MD-1
MD-1
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
1. Summary of the Machine
1.1 Features of the Machine
n
DR-ID 1305SE
- 48.6 x 16.7 inch size flat panel sensor (DR-ID 1305SE) enables long-length
radiography of the entire lower limbs or the entire vertebrae with a single irradiation.
This enhances the work efficiency of long-length radiography and also shortens a
constrained time of a patient, reducing patient burden.
- The flat panel sensor (DR-ID 1305SE) is also available for standard radiography.
48.6 x 16.7 inch size flat panel sensor enhances the work efficiency of patient
positioning.
- By utilizing FUJIFILM’s proprietary ISS (Irradiation Side Sampling) method and
GOS scintillator with an optimal composition of large and small phosphor particles,
images with high sensitivity and high sharpness are obtained. In addition, the noise
reduction circuit enhances the sensitivity and sharpness in low-density areas.
- After an X-ray irradiation process is completed, the image appears on the monitor of
the image processing unit in 9 to 19 seconds.
- The flat panel sensor (DR-ID 1305SE) has the X-ray automatic detection function
(AUTO DETECT). With this function, the flat panel sensor detects even a small
amount of X-ray precisely to start an exposure without connecting it to the X-ray
device.
- Up to two flat panel sensors (DR-ID 1305SE) can be used at the same time.
1.2 System Configuration Examples
The machine consists of the DR-ID 1305SE, DR-ID 1300MP and DR-ID 1200MC, and
serves as the system (DR-ID 1300) when combined with the DR-ID 300CL.
DR-ID 1300
(system)
DR-ID 1300PU
(panel unit)
DR-ID 1305SE
(flat panel sensor of wired type)
DR-ID 1300MP
(power supply unit)*1
DR-ID 1200MC
(control software)*2
DR-ID 300CL
(image processing unit)
*1: For supplying the power to the SE (flat panel sensor).
*2: For controlling the SE (flat panel sensor)