DART SERIES
CTP
SPECIFICATIONS:
Common to Dart Series
RECORDING•SYSTEM
External Drum
REPEATABILITY
±5 microns (±0.2 mil.)*
PLATE•SIZE
Minimum:
12.8" x 14.6"
(324 mm x 370mm)
Maximum: 32.7" x 26"
(830 mm x 660 mm)
SPK factory installed:
12" x 14.6"
(304 mm x 370 mm)
Dart E/S with SPK must
be ordered
EXPOSURE•SIZE
Across the drum:
Same as plate size
Around the drum:
Plate size less 27 mm
15mm head clamp,
12mm tail clamp
PLATE•ORIENTATION
Landscape
Portrait
MEDIA
Thermal (830 nm infrared
sensitive) plates
MEDIA•THICKNESS
6 to 12 gauge (0.15 to 0.3
mm)
INTERFACE
Fast PIF
OPTIONS
Punching – Heidelberg,
Komori, and other
SAL-E Single-cassette
autoloader
SAL Single-cassette
autoloader
MAL Multi-cassette
autoloader
SPK (Small Plate Kit)
12mm head clamp
Dart•4300•E•to•4300•S•
upgrade•
ENVIRONMENT
Recommended: 70˚F – 77˚F
Required: 65˚F – 79˚F
40% to 70% relative
humidity (non-condensing)
DIMENSIONS
Main unit: 69.7" W x 40.5"
D x 46.7" H (engine only)
POWER•
REQUIREMENTS:
Single-phase 200-240V,
20A, 4.0kW
Specific•to•Dart•4300•E
RESOLUTIONS
2400 dpi
2438 dpi
2540 dpi
LIGHT•SOURCE
16 channel infrared
laser diodes
IMAGING•TIME
11 plates per hour at 2400
dpi*
1
28.5" x 24.2" (LH-PJ)
(724 mm x 615 mm plate)
Specific•to•Dart•4300•S
RESOLUTIONS
1200 dpi
2000 dpi
2400 dpi
2438 dpi
2540 dpi
4000 dpi
LIGHT•SOURCE
32 source channel infrared
laser diodes
IMAGING•TIME
21 plates per hour at 2400
dpi*
1
28.5" x 24.2" (LH-PJ)
(724 mm x 615 mm plate)
SUPPORT FOR A WIDE RANGE OF PLATE SIZES
The Dart 4300E and 4300S can handle the plate
requirements of new larger-format 4-page presses. Both
support a maximum plate size of 830 x 660 mm (32 21/32"
x 26"), and are also capable of supporting some of the
smaller 2-page presses with a minimum plate size of 324
x 370 mm (12 3/4" x 14 9/16"). The Dart 4300S and 4300E
offer an unbeatable flexible and reliable solutions for fast
output of a wide variety of plate sizes.
AUTO-BALANCE FOR DIFFERENT PLATE
SIZES
Auto-balance lets you use a variety of plate sizes
without making manual adjustments for correct
drum balance. Simply select the type of plate
and the Dart automatically makes the necessary
adjustments to create perfect drum balance for
the plate size. The Dart 4300S and 4300E both
feature separate loading and unloading bays, allowing one plate to be readied for
loading while another is being exposed.
*Over four consecutive exposures on one
plate at 73.4˚F and 60% relative humidity
*1 May vary depending on the sensitivity
of the media.
Minimum plate size with factory
SPK option: 12" x 14
9
/
16
"
(304mm x 370mm)
SIMPLE UPGRADE
For increased productivity needs upgrade your Dart 4300E to a 4300S by simply
exchanging parts. This reduces waste expenses and improves the operational
efficiency of the platesetter.
AUTOMATIC INTERNAL PUNCH
Dart’s automatic inline punching system is the industry leader for enabling perfect
register on press. It does this by performing two types of punching (for press
and platesetter registration) at the same time, immediately before
mounting the plate on the drum. This method gives much greater
registration accuracy compared with either manual or offline
punching, eliminates human error, and achieves faster press
makeready. Punch blocks from Heidelberg, Komori, Bacher,
Protocol, Stoesser, Grapho Metronic, and Screen are available,
covering the full range of sizes for all major press types. Up to four
punchblocks can be mounted and selected according to plate
size and press type.
AUTOMATIC LOADING AND UPLOADING OPTIONS
The Dart 4300S and Dart 4300E can be configured for efficient automatic
operation with optional autoloaders, which have been heralded for their reliability
and precision. Both can be paired with the SAL (single-cassette autoloader). This
high-quality unit can hold up to 100 plates and automatically removes interleaf
paper before loading each plate. It is also possible to upgrade from the SAL to
the MAL (multi-cassette autoloader), which comes standard with three cassettes
and enables up to 300 plates of three
different sizes to be loaded and imaged in
the Dart 4300S or 4300E without operator
intervention. The Dart 4300S and Dart 4300E
can also be paired with the more economical
SAL-E single-cassette autoloader.
Both the Dart 4300S and Dart 4300E are
supported by an automatic processor
bridge, which extends process automation
all the way through to the plate processor.
MAX SIZE
32
21
/
32
" x 26"
(830 mm x 660 mm)
MIN SIZE
12
3
/
4
" x
14
9
/
16
"
(324 mm x
370 mm)
FUJIFILM North America Corporation, Graphic Systems Division
Phone: 800-877-0555 • Email: [email protected] • Web: www.fujifilmgraphics.com
DartSeries_130817
THE•FUJIFILM•GREEN•POLICY
We at Fujifilm believe that “sustainable
development” of the Earth, mankind,
and companies in the 21st century is an issue
that must be addressed with the highest priority.
As a socially responsible corporation, we actively
undertake corporate activities with our environmental
values in mind. We strive to be a dedicated steward
of the environment and assist our customers and
corporate partners in doing the same.
TM
