FujiFilm ClearView CS, Service Manual

Page: 935 / 1404

CR-IR 363
Service Manual
MU-2
MU-2
011-202-01
08.25.2003 FM4098
2. User Utility
The User Utility provides a maintenance tool used by both the end user and service
engineer. This chapter describes functions and operating procedures for "Master CL
Setting", which is important for servicing procedures.
2.1 Overview of User Utility
The architecture of the User Utility is shown in the tree diagram below.
n
Tree Diagram
n
Overview of Functions
The overview of the User Utility functions is presented below.
l
Master CL Setting
{MU:2.3 _ Master CL Setting }
l
Scanner Cleaning
The light-collecting mirror is rotated to clean the light-collecting face of the
light-collecting guide and perform its home-positioning.
l
Alarm Sound
Used to set how to stop the alarm sound and the volume of the sound.
l
Key Touch Sound
Used to set whether to enable or disable the sound when the LCD panel is touched.
Also used to set the volume of the key touch sound.
l
Backlight OFF Timer
Used to set the time until the backlight is automatically turned OFF when the LCD
panel is idle.
l
Sleep Timer
Used to set the time until the RU automatically enters the sleep mode when the RU is
idle.
l
Equipment Information
"Equipment description", "No. of IP reading processing", "No. of IP conveyance", "Total
time of laser ON", and "Total time of erasure lamp ON", and "Date of installation" are
displayed.
For "Date of installation", the date in the HISTORY LOG file is displayed; thus, if the
information is updated by EDIT HISTORY, the resulting updated date is "Date of
installation".
See the Instruction Manual.
{MU:2.3 _
Master CL Setting}
Scanner Cleaning*
Alarm Sound*
Key Touch Sound*
User Utility
Backlight OFF Timer*
Sleep Timer*
Equipment Information*
For more detail on those marked by *, see the Instruction Manual.