FujiFilm ClearView CS, Service Manual

Page: 936 / 1404

CR-IR 363
Service Manual
MU-3
MU-3
011-202-03
02.20.2004 FM4181
2.2 Starting and Exiting the User Utility
The procedures for starting and exiting the User Utility are described below.
2.2.1 Starting the User Utility
CAUTION
When starting the User Utility, make sure that all the processing, such as
reading, has been completed and the machine is in READY state.
1.
Touch the [Utility] button.
2.2.2 Exiting the User Utility
1.
Touch the [Return] button.
2.3 Master CL Setting
During installation or from the CL's that have been registered by RU PC-TOOL, set
the CL to be used as a master CL.
n
Function
The master CL can be changed. Up to four CL units can be registered. One of them
can be set as the RU’s default master CL.
CAUTION
Even when the master CL is changed, the IP address of the FTP server that is
set in the RU remains unchanged. Information to be stored in the FTP server,
such as error logs, is written into the FTP server of the IP address that is set in
the RU.
n
Procedures
u
NOTE
u
Do not change the master CL unless an emergency arises or the machine is faulty.
Changing the master CL erases the "ERROR LOG", "HISTORY LOG", and other data
necessary for the user.
For the master CL change procedure, see "Appendix 2. Setting the Master CL" in the
Installation volume.
{IN:Appendix 2. _Setting the Master CL}