FujiFilm ClearView CS, Service Manual

Page: 1204 / 1404

CR-IR 363
Service Manual
PM-3
PM-3
011-202-08E
09.30.2009 FM5540
l
Preventive maintenance programs to be performed every two years of
machine use or whenever a process count of about 120,000 is reached
( )
Reference
section
Maintenance program
Time
requirements
Periodic
replacement
parts
Remarks
2.1 Checking Error Log 1
3
Checking the Image/
Conveyance
15
4
Pulling Out the Machine 1
5.3 Removing the Covers (2 Year
Intervals)
7
6 Turning OFF the High-Voltage
Switch
1
7 Checking the Cassette Set Unit 15 Cleaning the rubber
rollers and suction
cups
8
Checking the Feed/Load
Conveyor Unit
45
8.1 ,
8.2 ,
8.3
Cleaning the Shock Absorbing
Rollers, Guides, and Rubber
Rollers
-
8.4.2 Cleaning/Replacing the Brush
Roller
4 Brush rollers (x2)
9 Checking the Side-Positioning
Conveyor Unit
10
9.2 Cleaning the Guide -
9.3.2 Cleaning the Cleaning Guide
Assembly (2 Year Intervals)
-
10 Checking the Post-Reading
Conveyor Unit
8
10.3 Removing the Post-Reading
Conveyor Unit
2
10.4 Cleaning the Guides, Shock
Absorbing Rollers, and Rubber
Rollers
-
10.5
Cleaning the Movable Guide
Assembly
-
11
Checking the Subscanning Unit 30
11.2 Cleaning the Antistatic Brush
Assembly
-
11.5 Cleaning the Glass Guide 30
11.8 Cleaning the Flywheel and
Kapton® Belt
-
11.9 Cleaning the SUS Belt -
12 Checking the Light-Collecting
Guide
10
12.3 Reinstalling the Post-Reading
Conveyor Unit
2
13 Checking the Erasure Conveyor
Unit
40
13.1 Removing the Lamp Assembly -
13.3 Cleaning the IP Switchback
Assembly
-
13.4 Cleaning the Reflection Plate
Guide and Rubber Rollers
-
13.5 Cleaning the Shock-Absorbing
Roller and Guide
-
13.7 Cleaning the Rubber Roller and
Guide
-
14 Checking Lamp Assembly 10
14.1 Cleaning/Replacing the Lamps - Lamps (x5) - It is presumed that
the erasure lamps
were lit for 1,800 h.
- #20001 or later
14.2 Cleaning the Filter - #20001 or later
14.4
Cleaning the Filter - #50001 or later
15 Cleaning Inside the Machine 3
16 Turning ON the High-Voltage
Switch
1
17 Cleaning/Reinstalling the Covers
and Louvers
10
18 Cleaning/Replacing the Air Filter 3 Filter (x1)
#20001 or later
19 Securing the Machine 1
20 Checking the Image/
Conveyance
15
21 Checking the Laser
Performance/ Sensitivity
22 Checking Error Log 1
23 Resetting the Erasure Lamp
Lighting Time
1
l
Parts to be replaced every two years of machine use or whenever a
process count of about 120,000 is reached
Reference section Parts Name Parts No. Qty. Remarks
8.4.2 Cleaning roller 334N5015B 2
14.1 Lamp 123N0007 5
18 Air filter 376N0234 1 #20001 or later