26
1
Turn on the power by opening the lens cover and
set the camera to the ready-to-shoot state.
2
If the flash ready lamp has not come on 20 sec-
onds or more after the power is turned on or the
shutter release is tripped, replace the batteries.
3
Remove the film, and load an unexposed roll.
●
Be sure not to move the film rewind switch while
film is loaded in the camera.
●
Load the film correctly.
●
After straightening the film cassette, close the
camera back.
9
9
24
24
13
16
1
Is the lens cover closed?
2
Is the flash ready lamp off?
3
Have all the frames on the film been
exposed?
●
Did you slide the rewind switch in mid-
roll?
●
Did you load the film properly?
●
Is the film cassette in straight?
The shutter release
won’t trip.
The film rewound during
photographing.
After loading the film and
closing the back cover,
the exposure counter
does not advance.
The camera back will
not close.
TROUBLE SHOOTING
During operation
Problems
Possible Causes
Solutions
Page
Summary of Contents for BIG VIEWFINDER AUTO 35
Page 1: ...OWNER S MANUAL ENGLISH...
