19
2.2 Connecting the Machine to a Computer
"Connecting Using Support Tools (Windows)" (P.22)
Automatically Connecting to a Wireless Network
This machine supports wireless LAN connection using WPS (push button method) and WPS (PIN
code method).
For WPS (push button method), configure the settings on the operator panel, and then press the
WPS button on your access point or wireless router.
For WPS (PIN code method), enter the PIN code assigned to the machine into the access point or
wireless router.
These methods are available only when the access point or wireless router supports WPS.
Refer
For details about the WPS operation on the access point or wireless router, see the manual supplied with
the access point or wireless router.
When Connecting With WPS (push button method)
1.
At the Home screen, tap > [Device] .
2.
Tap [Network Settings] > [Wi-Fi Settings] > [WPS].
3.
When the [Press the WPS button of the wireless LAN router.] message appears, press the WPS
button on the wireless network access point within 2 minutes.
When connection to an access point or wireless router is complete, the machine will restart
automatically.
When Connecting With WPS (PIN code method)
1.
At the Home screen, tap > [Device] .