175
10.5 Using the User Authentication Feature
3.
Tap [On].
4.
Enter the 4 digit passcode and tap [OK].
5.
Re-enter the passcode and tap [OK].
Enabling the User Authentication Feature from the Operator
Panel
Note
The User Authentication feature requires that [Admin Authentication] be enabled. For details, refer to
"Enabling the System Administrator Authentication Feature from the Operator Panel" (P.174).
1.
At the Home screen, tap > [Device].
2.
Tap [Security Settings] > [User Authentication].
3.
Tap [On]>[OK].
4.
When the [The Device will restart to enable user authentication. Configure settings via Internet
Services to carry out user authentication.] message appears, tap [OK].
After restarting, will be displayed in the upper left part of the screen.
Registering Users and Setting Usage Restriction with Internet
Services
Register user account information (user name and password) and set usage restriction of each
feature for guest users. In addition, set the usage restrictions for each feature for registered users as
necessary. You must be logged in the Internet Services as an administrator to configure settings.
