FujiFilm 16558126 User Manual Download Page 21

48

EN

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Note: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 
Note: FCC/INDUSTRY CANADA Radiation Exposure Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC 
radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should 
be installed and operated keeping the radiator at least 20cm or more away from person’s body in normal use position.

FCC CAUTION

Changes or modifications not expressly approved by 

FUJIFILM

 responsible for compliance could void the user’s authority to 

operate the equipment. 
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
Properly shielded cables must be used for connection to computers or AC plug in order to meet FCC emission limits.

This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be 
treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. 
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment 
and human health, which could otherwise be caused by inappropriate waste handling of this product.

Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment 
(Applicable in the European Union and other European countries with separate collection systems)

Summary of Contents for 16558126





























Reviews: