or change another battery pack.
Monitor
You can use the MONI button to receive the very low signal, and it
also can adjust the volume when the channel don’t have signal, hold
on the MONI button to monitor the background voice, undo to return
to the normal operation.
Choice QT
Channel display mode
Change the QT code provisionally
1. Press the FUNC button then #, the LCD display “OFF”
2. Rotate the channel selector to choose the new QT code
3. press any button can finish setup
Note: Turn off the transceiver or press any button except MONI, LAMP and
PTT can cannel the provisional data.
Frequency display mode
The same operation like channel display mode, choose the QT code
you need, press FUNC button the QT code will change to your
needed. In the process of operation press the buttons except FUNC
and VOL, it will exit the setup and return to the normal display mode,
the QT code is not changed.
Choice DQT
Channel display mode
Change the DQT code provisionally
1. Hold on the FUNC button one second then #, the LCD display
“OFF”
2. Rotate the channel selector to choose the new DQT code
3. press any button can finish setup
Note: Turn off the transceiver or press any button except MONI, LAMP and
PTT can cannel the provisional data.
Frequency display mode
The same operation like channel display mode, choose the DQT code
you need, press FUNC button the DQT code will change to your
needed. In the process of operation press the buttons except FUNC
and VOL, it will exit the setup and return to the normal display mode,
the DQT code is not changed.
